The prerequisites for CNC stamping need to meet the following operating requirements:
Equipment preparation:
CNC punch machines should be in good working order and have undergone regular maintenance and inspections.
Ensure that the power supply, hydraulic system, pneumatic system, etc. of the punch press are operating normally.
Install or debug automation devices (such as robots, etc.) to improve production efficiency and reduce operating errors.
Material preparation:
The materials used for hardware parts should meet the requirements and have good working performance.
The size, thickness, etc. of the material should match the processing capabilities of the CNC punch machine.
Tool preparation:
Select the appropriate tool size and determine the tool loading position according to the processing needs.
Determine mold clearance, lower mold thickness, and select appropriate intermediate rings and strippers.
Before starting production, make sure all tools are installed correctly and debugged.
Programming and Debugging:
Use CAD/CAM software to write or adjust processing programs according to part drawings.
Before actual production, simulate processing or trial cutting is carried out to ensure the correctness of the processing procedures.
Debugging equipment to ensure that punching speed, processing accuracy and other parameters meet the requirements.
Security:
Operators should wear protective equipment that meets regulations, such as safety helmets, gloves, goggles, etc.
Set up safety warning signs around the equipment and ensure there are no obstacles around the equipment.
During the production process, avoid direct contact with equipment to prevent accidents.
Quality control:
After punching the first sample, measure whether the size of each part is the same as the drawing, whether the burrs are normal, and whether the process needs to be changed.
Pay attention to whether the cutting tools leak or break during the production process, whether the burrs meet the requirements, whether the bed surface is clean, whether there are scratches on the workpiece, etc.
If there is any abnormality, stop the machine immediately for inspection and adjustment.
Maintenance:
Perform regular maintenance on CNC punch machines, such as cleaning, lubrication, tightening, etc.
Check and replace wearing parts, such as cutting tools, molds, etc.
Perform regular maintenance and inspections on the CNC system to ensure its stability and reliability.
Operating procedures:
The operator should be familiar with the operating procedures of the CNC punch press and operate in strict accordance with the procedures.
During operation, pay attention to maintaining the stability and accuracy of the equipment.
In case of equipment failure or abnormality, stop the machine immediately and notify maintenance personnel for processing.
In short, the prerequisites for CNC stamping need to meet the requirements of equipment, materials, tools, programming, safety protection, quality monitoring, maintenance and operating procedures, etc. Only when these requirements are met can the efficient, safe and stable progress of CNC stamping be ensured.
With the development of industrialization, hardware parts are in greater demand for industrial equipment and product production. In order to have better production efficiency. The production method of stamping metal is a common processing method at present. CNC stamping is currently the main method of stamping hardware processing, and many conditions must be met during the CNC stamping process. The main thing is what operational requirements must be met.
In the CNC stamping process, in order to achieve better production quality and safe operation, the CNC stamping hardware structure must meet the stamping requirements. Before CNC stamping, operators should protect their own safety and debug the equipment in advance. The materials used for hardware parts must be reasonable and have good working performance. Facing the requirements of the equipment. If the CNC stamping press has better technical level and conditions, it can be installed with automated devices, such as manipulators, etc., to avoid accidents and reduce operating errors. If you feel that there are dangerous factors during the CNC stamping process, you should stop the operation.
DongGuan Win-Leading Hardware Technology Co., Ltd. has developed over the years and specializes in hardware products such as hardware molds, stamping products, sheet metal bending, laser cutting, and CNC processing with its excellent manufacturing level and service attitude. It is named after its influence in the world's manufacturing industry and its ability to supply products all over the world. New and old customers are welcome to call us for inquiries.
